Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (2022)

Certain engines just don’t make power as easily as others. Case in point, Powerstroke engines versus Cummins engines for pulling applications. For Nate Bailor and Ben Burnworth, who focus on the Powerstroke engine family, they found themselves always chasing Cummins-powered competitors. However, rather than being defeated, it made them work harder to build a 7.3L Powerstroke that could keep up with the competition.

Nate Bailor and Ben Burnworth own Unlimited Diesel Performance located in Bremen, OH. The 5,000 sq.-ft., nine-employee diesel shop specializes in maintenance and repair work, stock rebuilds and performance engine builds for Powerstrokes. The two business partners started Unlimited Diesel Performance out of their truck pulling habit.

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (1)

“We started out truck pulling as a hobby,” Bailor says. “We got into the 7.3Ls back in the early 2000s. Nobody was really messing with them a whole lot. Everybody was building their 12-valve Cummins motors. We were just out there having a good time.

“Before long, we started getting people asking us to do work on their trucks. Our hobby turned into working on clients’ vehicles. Over the years, it’s turned into a full-time thing. It just got so busy that we both decided to dive in with both feet. We started Unlimited Diesel Performance in June 2004.”

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (2)

Naturally, the shop started with 7.3Ls, but over time, the shop has become proficient in the whole Powerstroke engine family – from a 7.3 all the way up to the 6.7 in the current model year trucks. The shop will also work on Cummins and Duramax engines, but those aren’t the shop’s focus.

Aside from specializing in Powerstroke engine work, another differentiator for Unlimited Diesel Performance is that the shop does its own machine work.

(Video) The Legend of the International DT466 Engine

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (3)

“We do most of our machine work in-house, and we’re working toward doing everything in-house,” he says. “We have a 3-axis vertical boring mill for all of our block work and head work. We’ve got a Sunnen SV15 diamond cylinder hone. We’ve got a Berco seat and guide machine. And, we just purchased a five-axis RMC V50 that we’re getting ready to set up. We’re going to be able to do our machine work a heck of a lot faster. We’re also going to include some cylinder head porting because nobody around here really does any port work on Powerstroke stuff. We also have cleaning equipment like our Jet Spray cabinet and we’re getting a Vapor Honing Technologies fully automated Gladiator system to clean blocks.”

On top of building engines in-house and doing machine work in-house, Unlimited Diesel Performance also builds its own injectors.

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (4)

“We build all of our own 7.3L Powerstroke fuel injectors in-house,” he says. “That was a big thing we started doing several years ago. We do everything from a completely stock rebuild, all the way up to our Stage 5 450cc injector with a 400% nozzle on it. Building the fuel injectors in-house is our biggest bread and butter deal. We sell a ton of them and we sell them worldwide.”

With all of these capabilities under one roof, it’s no wonder Nate and Ben have made huge leaps and bounds when it comes to their mechanical P pump 7.3L Powerstroke pulling engine, which runs inside a 1981 Ford F350.

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (5)

“As truck pulling got more and more competitive and guys were getting more and more power, the Ford side of things started to really lack in the ability to produce the power that we needed to keep up with these guys,” Bailor says. “We were pretty well tapped out at about 700 horsepower when everybody else was making 1,000-plus horsepower. We were just way back there.

“We had seen that Tom Tormoehlen at TFS in Vallonia, IN had done a P pump 7.3 set up for Ben Miller and his truck Double Overtime in Super Stock. We wanted to do that on a little bit smaller scale. We sent a block to Tom and he did some machine work and our build went from there.”

(Video) Everything Wrong with the 5.9L Cummins (12V & 24V)

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (6)

As it sits today, the 7.3 utilizes the stock block, stock crank and steel connecting rods from R&R (before Wagler bought the rod division). As the build got legs, Unlimited Diesel turned to nearby shops such as D&J Precision Machine for some assistance.

got on board with us because we were trying to figure out what we were going to do for cylinder heads, the intake manifold and all of that kind of stuff,” he says. “We sent a mock-up block and some cylinder heads to Drew and he started drawing things up in master cam and before we knew it, we were basically cutting the heads in half. Drew made a billet aluminum insert for the intake to take full advantage of the intake ports and do what he wanted to do porting wise to get airflow through the heads.

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (7)

“Once Drew cut the heads in half, he filled them with epoxy and mated an aluminum outer section to it that enabled us to run individual plenum runners. He built the whole top intake for us, which was basically a giant plenum on top.

“From there, we were all scratching our heads trying to figure out how to run this eight-cylinder inline pump down through the valley, and how to get the injector lines to the injectors. We ended up coming up with a design and running the injector lines over top of the plenum. But, Drew also engineered a Jesel roller rocker system underneath the valve covers for us, and we used Jesel solid roller lifters.”

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (8)

Unlimited Diesel also opted to use a Komatsu-style fuel injector because they needed something that would be long enough for the 7.3 heads, because those heads were thicker. The first idea was to go up through the valve cover, but they’ve since revise that.

“We found out on the dyno that the long injector was causing us some issues, so we wanted to get to a shorter injector and that picked us up some power,” Bailor says. “We are now using a billet Scheid injector that runs a longer injector line nut down through the valve cover. We also run a full dry sump system on it with a six-stage pump that has four suctions. We also run a main pressure section to the engine and we run a separate pressure to the turbo, so the turbo system is self-contained and the pump is self-contained.”

(Video) 7.3 Powerstroke engine tear down for Race Build Part 4

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (9)

As the 7.3L kept gaining power, Unlimited Diesel found issues with the cylinder heads and the original set of pistons.

“We ended up getting the engine so hot that we cracked the cylinder heads,” he says. “That was a learning experience, but Drew (D&J) built us a set of billet heads that made it so the sky was the limit. He raised the ceiling height on the heads and made them taller so we could get exactly what we wanted flow wise. He moved the injector angles to get exactly what we wanted there for fuel. We came up with a billet head design, because it was cost prohibitive to do another set of iron heads with this intake plenum that he had made. We didn’t want to keep cracking additional sets of heads.

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (10)

“When Drew did the billet heads, he also made us a set of pistons, so we’re using D&J’s FSR pistons, which incorporate a steel ring land. When we had melted down pistons in the past, we also beat the ring lands out of it as well. Nobody had this technology, but Drew came up with this forging that incorporated a steel ring land, which is exactly what we needed. We beat the piss out of those pistons for three years and they’re still looking brand new.”

Originally, Unlimited Diesel ran their 7.3 in the 3.0 Smooth Bore Limited Pro Stock class. With the cubic inch displacement of the 7.3 and the V8 configuration, the 3˝ inducer on the turbo was a huge limiting factor.

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (11)

“We were always making decent power, but when we were making 1,400 horsepower, a guy with a 5.9L or 6.7L was making 1,750 hp,” he says. “We were just always constantly behind with the turbo restrictions and everything. The latest engine we built for 7.3L set up still incorporated the stock block and everything, but we found our limit on the connecting rods. Our current set up right now is a 15mm pump based off of a Mack V8. We’re running a set of Scheid triple-feed billet-body injectors and a Wimer 4.4 turbo, which puts us into an Unlimited Single class or a ‘run-what-ya-brung’ style class.”

The 7.3L Powerstroke also features a Waterman fuel pump on the backside of the R&R pump, a taper lock design 11˝ damper that Riverside Engines helped with, and Ferrea valves. To keep things running smooth at high horsepower, Unlimited Diesel sets looser tolerances.

(Video) 4,500 HP John Deere Pro Stock Engine

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (12)

“With the dry sump pump, we’re running about 125-130 lbs. of oil pressure with that set up,” Bailor says. “We set the bearing tolerances a little bit looser than what most guys do, that way you’ve got a good cushion to keep parts from hitting each other. The looser tolerance, a heavier weight oil and the higher pressure has seemingly worked well for us. Every time we’ve taken this thing apart, the Clevite bearings look amazing.”

As it stands now, the 7.3L has made nearly 2,200 horsepower, but the rods and block need to be upgraded in order to gain even more horsepower.

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (13)

“We’re still swinging the stock crankshaft,” Bailor says. “We haven’t had any issues with the crankshaft, even at that power level, but we bent a connecting rod, so we’re looking at doing something different connecting rod-wise. Unfortunately, the 7.3L Powerstroke is not the most popular thing in the world anymore. There’s still a lot of diehard 7.3L guys, but in the aftermarket parts category, there’s not a huge demand for billet rods.

“When we get this CNC mill in here, we’re looking at doing our own rods. Another reason behind buying this CNC mill was we were having issues with the factory block. We’ve been through three or four different stock blocks now and every single one of them has cracked along the outside of the driver’s side of the block at the bottom of the head stud hole.

“When we bent this connecting rod, we also found that it started to crack the block from the inside as well. From that perspective, we decided that we were no longer going to use a stock block anymore and we’re in the process of building a billet aluminum block. It’ll still be based off of a 7.3L.”

(Video) 7.3 Blocked, 6.9 Engine Build Part 4: Assembly

Mechanical P Pump 7.3L Powerstroke Engine - Engine Builder Magazine (14)

With billet rods and a billet block on the docket, and the best set up yet on Unlimited Diesel’s mechanical P pump 7.3L Powerstroke, we can’t wait to see what horsepower levels this thing can achieve next!

Diesel of the Week is sponsored by AMSOIL. If you have an engine you’d like to highlight in this series, please emailEngine Builder Editor Greg Jones at[emailprotected]

FAQs

Can you p pump a 7.3 Powerstroke? ›

Everyone loves a P-pumped 7.3L Power Stroke. They lope, they smoke, they make big power and they always rally the Ford fan base.

How much does it cost to build a 7.3 Powerstroke? ›

Budgets range from $1,500 to $10,000 for each International mill and include reasonably priced parts from reputable aftermarket companies. However, they do not include labor you might have to pay should you prefer a shop perform the modifications.

How much HP can you get out of a 7.3 Powerstroke? ›

The 7.3 Powerstroke is a two-valve behemoth which measures in at 444 cubic inches and has a maximum stock power rating of 275hp and 525lb.

What is the fastest Powerstroke? ›

How does this four-ton Ford hit 60 mph in just 6.1 seconds? Spoiler alert: Its Power Stroke packs 1050 pound-feet of torque. A 2020 Ford F-250 Super Duty sped to 60 mph in 6.1 seconds, making it the quickest diesel pickup we've ever tested.

How much boost can a 7.3 Powerstroke handle? ›

'94.5-'99 7.3L: 380 to 400rwhp

Either charger can hold up to 30-35 psi of boost for a while, but 40 psi or more is asking a lot for a turbo that was originally intended to see a maximum of 17 to 23 psi.

How can I get more horsepower out of my 7.3 Powerstroke? ›

One of the main ways to increase power is to get more air into the engine as efficiently as possible. However, that air also has to exit the engine efficiently. That's where 7.3L Power Stroke exhaust mods come into play. An exhaust system will reduce back-pressure which helps increase power and reduce turbo spool time.

What is the highest horsepower 7.3 Powerstroke? ›

Powerstroke diesel. time! 2180 hp and 2821 LB-FT of Torque.

What size turbo is on a 7.3 Powerstroke? ›

7.3L Power Stroke

The GTP38R turbocharger contains an exclusive ball bearing cartridge for unbeatable response, efficiency, and durability. Elimination of thrust bearing eliminates Failures at elevated boost levels. The 88mm GT compressor wheel provides 33% more flow than the stock 80mm wheel.

How much is a new 7.3 diesel engine? ›

The 7.3-liter V8 was posted to the Ford Performance website this week as part number M-6007-73, available for a cool $8,150.

What kind of fuel mileage does a 7.3 Powerstroke get? ›

We generally assume onboard fuel-economy computers will fudge their numbers upward, but if that's the case here, then the 7.3 could use an umbilical cord connected to a tanker truck. While towing, we saw an indicated 8 to 9 mpg, and that figure didn't improve much without a trailer—we're talking 12 mpg.

How many miles will a Ford 7.3 diesel last? ›

Robust, iron parts, conservative power and low engine speed are the key ingredients for any diesel engine lasting forever—and if a 7.3L has gone unmodified yet been well maintained its entire life, 400,000 to 500,000 miles is virtually guaranteed.

What makes 7.3 Powerstroke so good? ›

According to TheDrivingLine.com, the 7.3 liter Powerstroke is reliable because its design is simple and only uses 6 bolts per cylinder. Another reason trucks with these engines are durable is that they feature a fixed geometry turbo and an oil cooler that is located externally.

Which is faster Cummins or Power Stroke? ›

The main reason is that the two main specs of torque and horsepower are very close. The Power Stroke has more horsepower but slightly less torque, while the Cummins has the opposite.

How fast is the fastest 7.3 Power Stroke? ›

1. Matt Kubik: 7.60 at 192.19 MPH. Thanks to the compound turbo'd, P-pumped 7.3L Power Stroke mill under the fiberglass front clip, Matt Kubik's “Demented” '98 Mustang has plenty of cool factor built into it.

What is the fastest diesel truck in the world? ›

The Banks Sidewinder® Dakota is the official F.I.A. World's Fastest Diesel Truck @ 217 mph (two-way average) and a best one-way of 222 mph.

Videos

1. The 7.3L Powerstroke Isn’t Dead!
(The Diesel Podcast)
2. The Truth About the 6.4L Powerstroke (And Why It's Not That Bad)
(Dust Runners Automotive Journal)
3. Here's Why the GM L8T is the Best LS/LT Engine
(Dust Runners Automotive Journal)
4. 7.3 POWERSTROKE ENGINE SHORT BLOCK REBUILD
(Diesel Tech Tv)
5. Fixing the 7.3 powerstroke no boost issue
(Cleffers Garage)
6. How Navistar Almost Killed Ford's Powerstroke Lineup
(Dust Runners Automotive Journal)

Latest Posts

Article information

Author: Mr. See Jast

Last Updated: 10/08/2022

Views: 5490

Rating: 4.4 / 5 (75 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Mr. See Jast

Birthday: 1999-07-30

Address: 8409 Megan Mountain, New Mathew, MT 44997-8193

Phone: +5023589614038

Job: Chief Executive

Hobby: Leather crafting, Flag Football, Candle making, Flying, Poi, Gunsmithing, Swimming

Introduction: My name is Mr. See Jast, I am a open, jolly, gorgeous, courageous, inexpensive, friendly, homely person who loves writing and wants to share my knowledge and understanding with you.