GE Universal Remote Codes & Program Instructions - Universal Remote Codes (2022)

We are having lots of devices at our home now a days. Likewise, we have, TV, CD Players, Set-top box and many more. Every device comes with its own remote which we ought to use to operate such devices. But sometimes we get confused due to so many remotes. Just all you have to program a GE universal remote with the various codes, and again it is a simple process. It sounds a little bit heavy but we made finding general electric universal remote codes process easier and tough and we wrote review about GE universal remote and also we can program GE universal remote without codes as well that method also we included in this article.

GE Universal Remote Codes For CL5, CL3 and CL4 Versions List

Below codes are all in one codes for ge which means you can use GE universal remote codes for CL5, Cl4, and CL3 versions remotes and program using programming instructions which are provided below this table.

Tv BrandGE Cl3, Cl4 and CL5 Codes
ABEX0185
ACME0008, 0050
ADA0020
ADC0002, 0006
ADMIRAL0020, 0226, 0001
ADVENT0176, 0922
ADVENTURA0174
AIKO0058
AIWA0195, 0196, 0227, 0269
ALLERON0051
AMARK0020
AMTRON0053
AKAI0105, 0002, 0077, 0254
ANAM NATIONAL0053, 0003, 0025, 0042, 0193
AOC0004, 0005, 0009, 0014, 0156, 0175, 0187
APEX0214, 0216, 0215, 0401
ARCHER0020
ASPECT0059
AUDIOVOX0053
AXION0177, 0921
BANG & OLUFSEN0190
BELCOR0004
BELL & HOWELL0031, 0049, 0000, 0001
BENQ0081, 0083, 0101
BRADFORD0053
BROKSONIC0147, 0135, 0250, 0257, 0310, 0394
BROKWOOD0004
CANDLE0004, 0009, 0174, 0008
CAPEHART0175
CELERA0214
CELEBRITY0002
CENTRIOS0169
CENTURION0009
CETRONIC0042
CHANGHONG0214, 0401
CITIZEN0004, 0009, 0053, 0105, 0109, 0189, 0135, 0001, 0008, 0042, 0058
CLAIRTONE0014
CLASSIC0214, 0401, 0042
COLOR VOICE0010
COLORTYME0004, 0009, 0010
CONCERTO0004, 0009
CONCIERGE0121
CONTEC0053, 0012, 0014, 0042
CORNEA0050
CRAIG0053, 0042
CROSLEY0062
CROWN0053, 0042
CURTIS MATHES0031, 0105, 0130, 0004, 0009, 0000, 0049, 0109, 0358, 0001, 0015
CTX0020
CXC0053, 0042
DAEWOO0130, 0004, 0009, 0100, 0005, 0138, 0043, 0140, 0039, 0252, 0279, 0444, 0080, 0042, 0058, 0017, 0010, 0126, 0018, 0127, 0019
DAYTRON0004, 0009
DELL0209, 0028, 0132
DIAMOND VISION0210, 0948, 0092
DIGISTAR1019, 0165, 0118, 0116, 0167
DIMENSIA0031, 0000
DISNEY0158
DUKANE0059, 0072
DUMONT0121, 0004
DURABRAND0189, 0135, 0157, 0153, 0254, 0458, 0217
DYNASTY0042
ELEKTRA0001
ELECTROBAND0002, 0014
ELECTROHOME0004, 0009, 0254, 0003, 0022
ELITE VIDEO0197
EMERSON0004, 0009, 0044, 0135, 0049, 0051, 0189, 0053, 0147, 0039, 0130, 0227, 0233, 0250, 0252, 0254, 0257, 0265, 0266, 0310, 0325, 0456, 0040, 0041, 0042, 0021, 0023, 0024, 0179, 0045, 0025, 0027, 0030, 0032, 0034, 0035, 0037
ENVISION0004, 0009, 0074
FISHER0049, 0110, 0268, 0180, 0012
FUJITSU0197, 0051
FUNAI0051, 0189, 0053, 0227, 0456, 0042
FUTURETEC0053, 0042
GATEWAY0046
GE0031, 0107, 0164, 0004, 0009, 0044, 0054, 0000, 0342, 0003, 0125, 0015, 0022, 0052, 0087
GIBRALTER0121, 0004
GOLDSTAR0004, 0009, 0005, 0227, 0338, 0012, 0057, 0080, 0156
GRUNDY0051, 0053
GUESTVISION0201
HAIER0081, 0216, 0217, 0157
HALLMARK0004, 0009
HARVARD0053
HITACHI0088, 0059, 0142, 0060, 0072, 0004, 0009, 0091, 0001, 0012, 0061, 0137, 0139, 0141, 0179, 0227
HISENSE0073, 0182, 0216
ILO0198, 1070, 1024, 1023
IMA0053
INFINITY0062, 0288
INITIAL1070
INSIGNIA0103, 0189, 0217, 0135, 0133, 0116, 0167, 0456, 0029
INTEGRA0181
INTEQ0121
JANEIL0174
JBL0062
JCB0002
JC PENNEY0031, 0004, 0005, 0009, 0105, 0107, 0109, 0054, 0000, 0087, 0008 ,0012, 0015, 0022, 0030, 0052
JENSEN0004, 0009, 0133
JVC0060, 0026, 0197, 0069, 0247, 0923, 0012, 0065, 0067, 0141
KAWASHO0004, 0009, 0002
KAYPANI0175
KEC0042
KENWOOD0004, 0009
KLH0214
KLOSS NOVABEAM0068, 0174
KONKA0053, 0011, 0016, 0047, 0066, 0103, 0412, 0413, 0029
KTV0053, 0014, 0021, 0042, 0070
KURAZAI0001
LASONIC0210, 0948
LG0004, 0050, 0009, 0005, 0227, 0338, 0012, 0057, 0080, 0156
LIQUIDVIDEO0177, 0168, 0921
LODGENET0031, 0202, 0000, 0001
LOEWE0211, 0062
LOGIK0031, 0000, 0001
LUCE0055
LUXMAN0004, 0009
LXI0031, 0004, 0009, 0049, 0062, 0107, 0109, 0000, 0227, 0015
MAGNASONIC0051
MAGNAVOX0062, 0004, 0009, 0456, 0183, 0226, 0288, 0008, 0068, 0075, 0141
MAJESTIC0031, 0000, 0001
MARANTZ0062, 0181, 0004, 0009
MEDION0213, 0198, 0158
MEGATRON0004, 0009, 0059
MEI0014
MEMOREX0004, 0009, 0049, 0051, 0135, 0031, 0000, 0268, 0310, 0001
MGA0004, 0005, 0009, 0051, 0012, 0022, 0141, 0180
MIDLAND0031, 0121, 0054, 0107, 0015
MINUTZ0052
MITSUBISHI0005, 0151, 0051, 0004, 0009, 0254, 0022, 0141, 0180
MONIVISION0036
MONTGOMERY WARD0031, 0001, 0000
MOTEVA0049
MOTOROLA0020, 0003
MTC0004, 0005, 0009, 0105, 0109, 0014
MULTITECH0053
MULTIVISION0084
MYRON & DAVIS0212
NAD0004, 0009, 0109, 0185
NEC0181, 0004, 0005, 0009, 0003, 0010, 0095, 0141
NET TV0046, 0124
NEXXTECH1052, 0167
NIKEI0042
NIKKO0004, 0009, 0058
NORCENT0216, 0043, 0056
NTC0058
OLEVIA1027
ONCOMMAND0201
ONKING0042
ONWA0053, 0042
OPTIMUS0170, 0185, 0374, 0381
OPTOMA1028
OPTONICA0020, 0095
ORION0121, 0135, 0035
PANASONIC0171, 0148, 0054, 0170, 0062, 0374, 0381, 0437, 0950, 0003, 0070
PHILCO0062, 0004, 0005, 0009, 0183, 0068, 0075, 0141, 0003, 0008
PHILIPS0062, 0204, 0184, 0208, 0205, 0206, 0207, 0004, 0189, 0183, 0199, 0200, 0288, 0456, 0003, 0008, 0068, 0075, 0086, 0087, 0141
PHILIPS-MAGNAVOX0062, 0204, 0207, 0183, 0226, 0288
PILOT0004
PIONEER0185, 0181, 0072, 0004, 0009, 0090, 0179
PIVA1075
POLAROID0182, 0173, 0133
PORTLAND0004, 0005, 0009, 0058, 0138, 0130
PRECISION0166
PRICE CLUB0105
PRIMA1019, 0165, 0116, 0167
PRINCETON GRAPHICS0020, 0099
PRISM0054
PROSCAN0031, 0107, 0015, 0000, 0162, 0163
PROTON0192, 0004, 0009, 0093, 0175, 0186
PROVIEW1025, 1026
PULSAR0121, 0004
QUASAR0171, 0148, 0054, 0170, 0062, 0374, 0381, 0003, 0070
RADIO SHACK0031, 0004, 0048, 0049, 0053, 0170, 0009, 0227 ,0342, 0000, 0012, 0041, 0042, 0095
RCA0031, 0004, 0048, 0054, 0094, 0100, 0102, 0107, 0129, 0191, 0005, 0009, 0000, 0162, 0163, 0342, 0003, 0015, 0022, 0096, 0113, 0125, 0179, 0187, 0188
REALISTIC0031, 0004, 0048, 0049, 0053, 0170, 0009, 0000, 0227, 0012, 0041, 0042, 0095
RHAPSODY0014
RUNCO0121, 0181, 0111
SAMPO0124, 0046, 0004, 0009, 0175, 0012
SAMSUNG0105, 0077, 0076, 0109, 0007, 0009, 0004, 0005, 0085, 0172, 0942, 0358, 0012, 0015, 0080, 0104, 0106
SAMSUX0009
SAMTRON0105
SANSUI0135, 0310
SANTECA0194
SANYO0049, 0097, 0110, 0004, 0268, 0012, 0108, 0180
SCOTCH0004, 0009
SCOTT0004, 0009, 0051, 0053, 0024, 0035, 0042
SEARS0031, 0062, 0049, 0051, 0105, 0004, 0009, 0107, 0109, 0110, 0189, 0000, 0112, 0079, 0394, 0456, 0012, 0015, 0180
SELECTRON1022, 1020, 1021
SHARP0079, 0123, 0063, 0020, 0004, 0009, 0226, 0266, 0006, 0095, 0122
SHOGUN0004
SIGNATURE0031, 0000, 0001, 0023
SIMPSON0008
SONIC0014
SONY0128, 0013, 0002, 0071, 0380
SOUNDESIGN0004, 0009, 0051, 0053, 0008, 0042
SPECTRAVISION0203
SQUAREVIEW0189
SSS0004, 0053, 0042
STARLITE0053
STAR SIGHT0064
SUPRA0004, 0082
SUPERSCAN0112, 0079, 0456
SUPERSONIC0944
SUPREMACY0174
SUPREME0002
SVA021
SYLVANIA0062, 0004, 0009, 0135, 0189, 0183, 0227, 0456, 0008, 0068 ,0075, 0141, 0161
SYMPHONIC0053, 0189, 0227, 0456, 0024
SYNTAX1027
TANDY0020
TATUNG0081, 0198, 0003
TECHNICS0054
TECHWOOD0004, 0009, 0054
TEKNIKA0031, 0004, 0005, 0009, 0051, 0053, 0105, 0109, 0170, 0000, 0174, 0001, 0008, 0012, 0042, 0058
TELECAPTION0117
TELERENT0031, 0000, 0001
TERA0004, 0186
TEVION0198
TMK0004, 0009
TOSHIBA0159, 0178, 0109 ,0120, 0181, 0105, 0049, 0095, 0170, 0260, 0358, 0394, 0924, 0012, 0095, 0117, 0141
TRUTECH1029
UNIVERSAL0052, 0087
VICTOR0060
VIDTECH0004, 0005, 0009
VIEWSONIC0046, 0072
VIKING0174
VIZIO0081
WARDS0031, 0062, 0004, 0005, 0009, 0051, 0000, 0068, 0075, 0087, 0095, 0119, 0052, 0001, 0008, 0024
WESTINGHOUSE0143, 0114
WHITE WESTINGHOUSE0100, 0130, 0138, 0136, 0227, 0279, 0080
YAMAHA0170, 0004, 0005, 0009
ZENITH0121, 0009, 0050, 0078, 0091, 0138, 0059, 0131, 0038, 0111, 0134, 0153, 0064, 0004, 0135, 0226, 0227, 0245, 0247, 0252, 0266, 0288, 0310, 0338, 0358, 0023, 0058, 0039, 0001

Contents

  • 1 GE Universal Remote Codes For CL5, CL3 and CL4 Versions List
    • 1.1 GE DVD Universal Remote Codes List
    • 1.2 GE VCR Universal Remote Codes
    • 1.3 GE CABLE Set-top Box Devices Universal Remote Codes
    • 1.4 GE DVD Recorders + RW Universal Remote Codes
    • 1.5 GE HDTV Set Top Boxes Universal Remote Codes
    • 1.6 GE TV/DVD Combos Universal Remote Codes
    • 1.7 GE TV/VCR/DVD Combos Universal Remote Codes
    • 1.8 GE SAT/DTV/WebTV Universal Remote Codes
    • 1.9 GE DVD/VCR Combos Universal Remote Codes
    • 1.10 GE DVR/DVD Combos Universal Remote Codes
    • 1.11 GE DVR/SAT Combos Universal Remote Codes
    • 1.12 GE DVR/CABLE Combos Universal Remote Codes
    • 1.13 GE Laser Disc Universal Remote Codes
    • 1.14 GE DVR Universal Remote Codes
    • 1.15 GE Home Automation Universal Remote Codes
    • 1.16 GE Home Theater in a Box (HTIB) Universal Remote Codes
    • 1.17 GE TV/VCR Combos Universal Remote Codes
  • 2 How to Program GE Universal Remote
  • 3 How to Program GE Universal Remote Without Codes
  • 4 How to Program GEUniversal Remote With Manual Method
  • 5 How to Program GE Universal Remote With Code Search
  • 6 Things to Do BeforeProgramming GE Universal Remote
  • 7 GE Universal Remote
  • 8 What If GE Universal Remote Code Not Work?

GE DVD Universal Remote Codes List

ADVENT: 0922
AFREEY: 0417
AIWA: 0414
AKAI: 0395, 0435
AMES: 0431
AMW: 0917, 0918

For other brands GE DVD remote codes visit this post

GE VCR Universal Remote Codes

ADMIRAL: 0226
ADVENTURA: 0251
AIKO: 0252
AIWA: 0245, 0227, 0269, 0251
AKAI: 0227, 0229, 0228, 0230, 0231, 0254, 0303, 0337

For list of all GE universal remote CL4 codescheck this post.

GE CABLE Set-top Box Devices Universal Remote Codes

ABC: 0461, 0463, 0464, 0465, 0466
ADELPHIA: 0512, 0511
ALLEGRO: 0524, 0525
AMERICAST: 0527
ANTRONIX: 0468, 0469
ARCHER: 0468, 0469, 0470, 0471

(Video) How to Program GE Universal Remote 40081 with TV by Auto Code Search Method

For Other Brands GE cable set top box devices codes check this post

GE DVD Recorders + RW Universal Remote Codes

ASPIRE: 0933
BROKSONIC: 0967
CENTRIOS: 0951, 1060, 1061
COBY: 0894
CYBERHOME: 0939
EMERSON: 0899

If you wanted other brand GE DVD recorders + RW remote codes then kindly visit this post to get your code.

GE HDTV Set Top Boxes Universal Remote Codes

HITACHI 61HDX98B: 0632
HUGHES HTL-HD: 0607, 0632, 0641
HUGHES HIRD-E8: 0607, 0632, 0641
LG LSS-3200A: 0607, 0632, 0641
LG HTL-HD: 0607, 0632, 0641

For other brands GE HDTV set top boxes remote codes visit this post to get the codes of your brand

GE TV/DVD Combos Universal Remote Codes

APEX: 0214, 0401
AXION: 0177, 0921
BROKSONIC: 0394
CHANGHONG: 0214, 0401
CLASSIC: 0214, 0401

We added other brands GE TV/DVD combos remote codes you can check them here

GE TV/VCR/DVD Combos Universal Remote Codes

DIAMOND VISION: 0092, 0896
MAGNAVOX: 0456
PANASONIC: 0437
PHILIPS: 0456
SAMSUNG: 0942

For other brands GE TV/VCR/DVD combos remote codes just check this post to get your brand universal remote code.

(Video) GE Universal Remote Control Auto Code Search

GE SAT/DTV/WebTV Universal Remote Codes

BELL EXPRESSVU: 0654, 0647, 0655, 0628
CHANNEL MASTER: 0577, 0578, 0579
CHAPPARAL: 0560, 0561
CHEYENNE: 0561
DRAKE: 0562, 0574, 0587

for all brands GE SAT/DTV/WebTV remote codes check this post

GE DVD/VCR Combos Universal Remote Codes

BROKSONIC: 0394, 0967
CINEVISION: 0405, 0245
DAEWOO: 0971
DIAMOND VISION: 0896
DURABRAND: 0405, 0245
EMERSON: 0456, 0458, 0227

For all brans GE DVD/VCR combos remote codes kindly check this post.

GE DVR/DVD Combos Universal Remote Codes

ILO: 0959
JVC: 1072
LITEON: 0959
MEDION: 0959
PANASONIC: 0387

We added all GE DVR/DVD combos remote codes in this post kindly check them out if your brand code is not there in above list.

GE DVR/SAT Combos Universal Remote Codes

DISH NETWORK: 0655, 0647
DREAMBOX: 0620
ECHOSTAR: 0655, 0647
EXPRESSVU: 0647, 0655
FORTEC STAR: 0569, 0555, 0556

If your brand code is not there then check GE DVR/SAT combos remote codes separate post.

GE DVR/CABLE Combos Universal Remote Codes

ILLICO: 0506
PIONEER: 0506
ROGERS: 0506
SCIENTIFIC ATLANTA: 0506
TIME WARNER: 0506

(Video) GE Universal Remote Controls Overview

In above list if you not see your brand code kindly check GE DVR/CABLE combos remote codes post.

GE Laser Disc Universal Remote Codes

PIONEER: 0305
PROSCAN: 0308
RCA: 0308
SANYO: 0232
SONY: 0323

For other brand GE Laser Disc remote codes kindly visit this post.

GE DVR Universal Remote Codes

HUGHES: 0580
HUMAX: 0912
PANASONIC: 0373, 0387
PHILIPS: 0371, 0344, 0345
PIONEER: 0909, 0977
RCA: 0409

For more GE DVR remote codes kindly check out this post.

GE Home Automation Universal Remote Codes

  • 0998

GE Home Theater in a Box (HTIB) Universal Remote Codes

AMW: 0918
APEX: 0436
BOSE: 0672
CENTRIOS: 1067, 1055, 0449
CLASSIC: 1051
CRITERION: 0448

We Mentioned list of all brand codes in single post GE Home Theater in a box (HTIB) remote codes check them out if you not see your brand name in above list.

GE TV/VCR Combos Universal Remote Codes

AIWA: 0227, 0269
AKAI: 0254
BROKSONIC: 0310, 0147, 0250, 0147, 0257
CURTIS MATHES: 0358
DAEWOO: 0039, 0252, 0138, 0279

For list of all GE TV/VCR combos remote codes check this post.

(Video) How to Program GE Pro Universal Remote Control to Samsung TV

Because you might be thinking that you have to program something even when you are not a programmer. But there is nothing like that. You can general electric universal remote codes so that you can apply them very easily. I hope now you are getting my point. Just you need the correct GE universal remote control codes and that’s all you need to do, to convert your normal remote into a GE universal remote.

GE Universal Remote Codes & Program Instructions - Universal Remote Codes (1)

How to Program GE Universal Remote

  • After all the things turn the device on you want to control with your GE Universal Remote.
  • Then press and hold the “Setup button” (6) until the red light comes on.
  • Now press the device button you want to use. Like, DVD, Set-top box(3) or anything else.
  • Now you have to Enter the device code from above list if you see more than one codes then start from the very first from the top.
  • The red light will turn off once the code entered perfectly.
  • Now, press the power button by aiming the device. If your GE universal remote control codes working then the device will turn off if it doesn’t then try the another one from the list of GE remote codes.

How to Program GE Universal Remote Without Codes

In the auto search method, all the universal remote codes are gone through scanning process in the remote. It scans one code at a time to find out the correct remote code that works with your remote to program the control. Follow the instructions given below:

  1. “Switch On” the smart device like “TV” that you want the universal remote to operate.
  2. “Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
  3. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals. Press “up” or “down” key continuously till the device will turn off.
  4. Verify the code by clicking on “power” key. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly.
  5. Now tap the “device” button to save the code. LED of Device will blink twice for confirming the code stored.

How to Program GEUniversal Remote With Manual Method

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment.

  • First you need to “Turn The Device On”
  • Press the “TV” on your “GE universal remote”
  • Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”)
  • Finally enter the “Keycode” which you collected from the programming guide (Instructions Booklet)
  • Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button
  • You can release the “Power Button” whenever the screen switches off

That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table.

How to Program GE Universal Remote With Code Search

If you couldn’t find the key code which works for the device at that time you can setup your universal remote to search mode for the correct one. Its a code in manual which forces the remote into the search mode

(Video) How to set up/connect GE universal remote control to Samsung TVs and Roku Boxes (step by step)

  • First of all “Turn The Device On”
  • Now press and hold the “Setup” button
  • Enter the “9-9-1” (three digit) code
  • Now hold down the “Power Button” on the remote and then press the Channel up them until the device in this case your tv “Turns Off”

The above method might take some extra time but it is very important to find your key code. Once you have done the above procedure your remote should be working for all the in functions.

Things to Do BeforeProgramming GE Universal Remote

  • After all the things turn the device on you want to control with your GE Universal Remote.
  • Then press and hold the setup button until the red light comes on.
  • Now press the device button you want to use. Like, DVD, Set-top box or anything else.
  • Now you have to Enter the device codeif you see more than one codes then start from the very first from the top.
  • The red light will turn off once the code entered perfectly.
  • Now, press the power button by aiming the device. If your GEuniversal remote control codes working then the device will turn off if it doesn’t then try the another one from the list of GE remote control codes.

GE Universal Remote

  1. First of all, you need to pick you GE universal remote and you have to remove the battery cover of your GE universal remote.
  2. Now, you just have to identify the version of your GE Universal Remote, here are some tips to locate it, if there is any confusion, V1-V5, none = V1 (older), newest = CL3 or CL4.
  3. Now place the batteries again and also replace the battery cover perfectly.
  4. Now all you have to check above table where you will find the full list of programming codes for the GE Universal Remote. It would be the best place which you will see neat and clean and easy to read and understand.
  5. Now you have to scroll the page to find out the Ge universal CL3,CL4, orCL5.Click the button that matches with the version number that you found inside the battery of your GE Universal Remote.
  6. After that, you ought to select the device category from the drop-down menu according to the device you are using. Either it is an XBOX gaming device or an HD Set-top box.
  7. Now in the next, you will have to select the brand name from the brand name menu or drop-down menu. Once you have done you will see one or more codes for that device.

What If GE Universal Remote Code Not Work?

  1. If the first code doesn’t work, then, first you need to try more codes from the table list.
  2. Still, if you face the problem, then replace the batteries of your remote.
  3. There might be a physical barrier try to remove it and don’t place it between the remote and the device you want to control.
  4. Now try to use more buttons and more features. Because a GE Universal Remote doesn’t work with all the features so you should try for more features also.

This was all about how you can program a GE Universal Remote to get rid of from the confusion of using so many remotes. It is too easy and anyone can perform this process very easy. So, it is your turn to give it a try.

FAQs

How do I program my GE universal remote to my TV? ›

Point you remote at the device. And then press and release the power button to start the code search

How do I know which universal remote code to use? ›

Universal Remote Codes
  1. Locate the model and code list version sticker by opening the battery compartment and removing the batteries.
  2. Identify the code list version. ...
  3. Access the remote codes for your version. ...
  4. Press and hold down the SETUP button until the remote's red light turns on.

How do I program my old GE Universal Remote? ›

How to Program a GE Universal Remote Control.
  1. Enter Setup Mode. Press and hold down the SETUP button on the remote until the red light on the remote turns on. ...
  2. Press the device type button. ...
  3. Enter the device code. ...
  4. Tests the results. ...
  5. Repeat this process for your other devices.

How do I program a GE Universal Remote without a code? ›

Method 1: How To Program A GE Universal Remote WITHOUT Codes

Manually turn on the device you want to control. Press and hold the SETUP button until the red indicator light stays on and then release the button. Press and release the button corresponding to the type of device you wish to control (TV, DVD, etc)

How do I find the 4 digit code for my TV? ›

How Do You Find the Four Digit Code for Your TV?
  1. Getting the Code From the Tv Manual. Check the User's Manual of your remote control to locate the code section. ...
  2. Using Website Search. ...
  3. Using Code Search. ...
  4. Getting the Code From the Manufacturer.
5 May 2021

What is the 4 digit code for GE Universal Remote? ›

Ge remote can control all home theater devices and components. Ge Universal remote allows you to set aside the individula device remotes for one Ge remote.
...
4 digit GE codes for TV sets including LCD, Plasma, and Panel TVs.
BrandCode
MEI0014
MEMOREX0004 0009 0049 0051 0135 0031 0000 0268 0310 0001
226 more rows

Do all universal remotes use the same codes? ›

Something else to bear in mind is that not all universal remotes use the same programming methods. While this guide is a generalized article for how to program a remote, refer to the specific instructions that come with your brand of remote. Every brand of universal remote is different.

How do I activate my universal remote? ›

How do you program a universal remote?
  1. Power on the TV or other device you'd like to connect to.
  2. Insert batteries into your remote and point at the device.
  3. Press and release the correct device button on your remote for the device you're connecting. ...
  4. Now press the power button and the device button simultaneously.

How do you pair a remote to a TV? ›

How to Program and Pair Your Remote - YouTube

How do you auto search a GE Universal Remote? ›

How to Program GE Remote with TV using Auto Code Search Method

Why is my GE universal remote not working? ›

Your remote may be using shift mode. Press and release the shift/setup button and then use your arrow buttons while the red light is blinking. If this doesn't work or your remote doesn't have a shift function, try reprogramming your remote with a different device code.

How do I program my GE 34459 6 device universal remote? ›

Press and hold the SETUP button until the red indicator stays on (approximately 2 seconds) and then release the button. Press and release the desired device button (TV, DVR, CBL, B-RAY, AMP, AUX) you would like the code for. Press and release ENTER button. Press and release the #1 button.

How do you program a GE Big button backlit universal remote? ›

Easliy Program GE Universal Remote 33712 with TV using Direct Code ...

How do I program my GE universal remote to my Samsung TV? ›

How To Program the GE Remote
  1. Manually turn on your Samsung TV.
  2. Press and hold the 'Setup' button until the red light turns on.
  3. Press the 'TV' button on the remote. ...
  4. Point the remote at the TV and press the 'power' button on your universal remote. ...
  5. Repeat the previous step until the TV turns off.
13 Apr 2022

How do I program my GE universal remote to my LG TV? ›

Here's how to automatically program your GE remote:
  1. Make sure your LG TV is powered on.
  2. Press and hold the Setup button on your remote until the red LED light comes on.
  3. Press the TV button on your remote.
  4. Wait for the red LED light to flash once.
  5. Point the remote at your TV and press the Power button.
13 Aug 2022

How can I cast my phone screen to a non smart TV? ›

For an iPhone, if you scroll from the top of your phone to view the control center, this option will appear as “Screen Mirroring.” Select the Fire TV Stick from the list of available devices. For an Android phone, open the device's settings and search for “Wireless and Bluetooth Connections” or “Wireless Projection.”

How do I reset my RCA universal remote without a code? ›

If your RCA universal remote does not have a Code Search button
  1. Power on the equipment you want to control.
  2. Press and hold the button on the universal remote that matches the device you're pairing (e.g. if it's a DVD player, press the DVD button).

How do I program my GE Universal Remote 33709? ›

How do you program a GE universal remote code 33709? Press and hold down the SETUP button on the remote until the red light on the remote control turns on. … Press and release the desired device button (TV, cable, DVD, aux) you would like the code for. Press and release the ENTER button.

How do I program my GE Universal Remote 24922? ›

ge 24922 universal remote codes
  1. Manually turn on the device (TV, VCR, DVD, etc.) ...
  2. Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release.
  3. Press and release the button for the device you are programming (TV, VCR, DVD, etc.).

How do I program my GE universal remote to my Vizio TV? ›

Turn on your Vizio TV using the previous remote or its power button. Press and hold the Setup button on your GE remote. When the red light turns on, press the TV button on your remote. Using the remote's keypad, type in the appropriate code for your TV model from the list above.

How do you program a remote to a TV? ›

Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on, and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

How do you auto search a GE Universal Remote? ›

How to Program GE Remote with TV using Auto Code Search Method

Why is my GE universal remote not working? ›

Your remote may be using shift mode. Press and release the shift/setup button and then use your arrow buttons while the red light is blinking. If this doesn't work or your remote doesn't have a shift function, try reprogramming your remote with a different device code.

How do I program my GE remote to my Samsung TV? ›

How To Program the GE Remote
  1. Manually turn on your Samsung TV.
  2. Press and hold the 'Setup' button until the red light turns on.
  3. Press the 'TV' button on the remote. ...
  4. Point the remote at the TV and press the 'power' button on your universal remote. ...
  5. Repeat the previous step until the TV turns off.
13 Apr 2022

Can you reprogram any remote to any TV? ›

The good news is: yes, you can use a universal remote with any TV sold today. To replace your TV's remote, you could buy a device-specific remote from your TV manufacturer, but this could prove expensive and is actually unnecessary.

Does a TV have to be on to program a universal remote? ›

A universal remote is a remote that can substitute for the remote that came with your TV, once it's been programmed. While it's recommended you have the TV active when programming is recommended, you can still do it while the TV is off.

What is the device button on a universal remote? ›

There are Three ways you can Program your Remote:

-In all sections, when you are instructed to press a [DEVICE] button, that means you should press either the CBL, TV, or DVD button, depending on which device you are programming the remote to operate.

How do I program my GE 34459 6 device universal remote? ›

Press and hold the SETUP button until the red indicator stays on (approximately 2 seconds) and then release the button. Press and release the desired device button (TV, DVR, CBL, B-RAY, AMP, AUX) you would like the code for. Press and release ENTER button. Press and release the #1 button.

How do I program my GE Universal Remote 24922? ›

ge 24922 universal remote codes
  1. Manually turn on the device (TV, VCR, DVD, etc.) ...
  2. Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release.
  3. Press and release the button for the device you are programming (TV, VCR, DVD, etc.).

How do you program a GE Universal Remote 33709? ›

How do you program a GE universal remote code 33709? Press and hold down the SETUP button on the remote until the red light on the remote control turns on. … Press and release the desired device button (TV, cable, DVD, aux) you would like the code for. Press and release the ENTER button.

Why is my TV not responding to my universal remote? ›

Make sure there are no obstructions between the device you wish to control and the remote itself. Most remote controls use infrared (IR) technology, which means they need to be aimed directly at the device you want to control. If something is blocking the remote, your commands will not work.

Why is my TV not responding to my remote? ›

Make sure none of the remote buttons are jammed or stuck. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control.

Why won't my universal remote connect? ›

Install new batteries in the remote control. Make sure that the Infrared (IR) sensor of the device isn't blocked. Depending on the remote control, press the appropriate function button or move the slide switch for the product to be operated. Try using the remote control at varying distances from the product.

Videos

1. How to Program GE Universal Remote with TV using Auto Code Search Method
(mailtosimer)
2. How to Program this 3 Device GE Universal Remote Control in Just ...
(Take a Bath Productions)
3. How to Program GE Remote with TV using Auto Code Search Method
(mailtosimer)
4. How to Program/Connect/Set up QFX Universal Remote Control in 2 different Methods (Step by Step)
(How To Do Topics)
5. GE Universal Remote Codes (A-I)
(Nairapreneurs)
6. [Fixed] GE Universal Remote Menu Buttons Not Working
(the fiX files)

Top Articles

You might also like

Latest Posts

Article information

Author: Maia Crooks Jr

Last Updated: 08/08/2022

Views: 5716

Rating: 4.2 / 5 (43 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Maia Crooks Jr

Birthday: 1997-09-21

Address: 93119 Joseph Street, Peggyfurt, NC 11582

Phone: +2983088926881

Job: Principal Design Liaison

Hobby: Web surfing, Skiing, role-playing games, Sketching, Polo, Sewing, Genealogy

Introduction: My name is Maia Crooks Jr, I am a homely, joyous, shiny, successful, hilarious, thoughtful, joyous person who loves writing and wants to share my knowledge and understanding with you.