Best Outlet Extender for Tile (11 Thrilling Facts) (2023)

If you have ever installed tile, you know that working around outlets can be a challenge. You can either move the outlet, which may not be possible, or you can use an outlet extender.

Outlet extenders are devices that fit over an existing outlet and extend it out from the wall, giving you more room to work with when installing tile.

In this blog post, we will explore the use of outlet extenders for tiles and how they can be a helpful tool in your next project.

Table of Contents (Jump Ahead To)

Can You Use an Outlet Extender for Tile?

If you are looking to add an outlet extender to your tile, there are a few things you need to know.

First, make sure that the outlet extender you purchase is rated for tile.

Second, you will need to drill a hole in the tile in order to insert the outlet extender.

Third, make sure that the outlet extender is flush with the tile so that it does not protrude and create a tripping hazard. Fourth, use a tile caulk to seal around the outlet extender.

By following these simple steps, you can easily add an outlet extender to your tile.

Is it safe: To useoutlet extender for tile?

Extension cords and outlet extenders can be a convenient way to add extra outlets to your home without having to hire an electrician. However, there are some safety concerns to be aware of when using these devices.

For instance, if an outlet extender is not rated for the same amount of voltage and amperage as the outlet it is being used with, it could create a fire hazard. Additionally, outlet extenders can create tripping hazards if they are not used correctly.

Therefore, it is important to consult with an electrician before using an outlet extender in your home. They can help you choose the right device for your needs and ensure that it is installed safely.

Is it worth it: To useoutlet extender for tile?

If you’re considering using an outlet extender for your tile project, there are a few things you should keep in mind.

(Video) 5 Top Ways to Secure a Loose Wall Plug (11 Methods Tested) 🧰

  • First, outlet extenders are not always necessary. If you have outlets that are close to the tile, you may be able to avoid using an extender altogether.
  • Second, outlet extenders can be expensive. They typically range in price from $15 to $50, depending on the quality and features.
  • Finally, outlet extenders can be difficult to install. If you’re not experienced in installing electrical outlets, you may want to hire a professional to do the job for you.

So, is it worth it to use an outlet extender for tile? That depends on your individual situation.

If you have the budget and the ability to install the extender, it may be worth it to you. But if you’re on a tight budget or you’re not confident in your installation skills, you may want to skip the extender and find another solution.

Extra Note: Best Outlet Extender for Wall (7 Turbo-Charge Facts)

How to use an Outlet Extender for Tile:

If you’re planning on tiling your home, you may need to use an outlet extender. This is a device that allows you to extend an outlet so that it can be used for tiling. Outlet extenders are available at most home improvement stores.

Here’s how to use an outlet extender for tiling:

  1. Start by measuring the area where you need to extend the outlet.
  2. Cut a hole in the drywall that’s big enough for the outlet extender.
  3. Attach the outlet extender to the outlet.
  4. Secure the outlet extender in place with screws.
  5. Attach the tile to the outlet extender.

Outlet extenders are a simple and easy way to extend an outlet for tiling. Follow these steps to keep you guided on how to install an outlet extender for tiles.

Best Outlet Extender for Tile

1. Outlet Spacers Extender Kit

Best Outlet Extender for Tile (11 Thrilling Facts) (1)

Outlet Spacers Extender Kit has an easy installation procedure. It is straightforward, quick, and safe. After determining the length of your outlet box, cut the outlet tools and use the extra long outlet screws to keep the plate flush against the wall; this will save you time and energy.

Extra long wall plate screws: 24 1-1/2 inch 6-32 for nearly any sized recess, the outlet screw can simply be slid through the outlet tools and quickly adjusted to the depth you want; When utilizing the whole length, you may require longer screws.

Installing an electrical outlet extender kit for granite, wood, marble, tile, or even drywall is possible with this product;

The compressibility gives solidity and strength, while the flexibility makes it easy to restore sunken, loose, or misaligned electrical outlets or switches to a new wall surround.

What Makes it Different: 48 Pieces Included

2. Outlet Box Extender

Best Outlet Extender for Tile (11 Thrilling Facts) (2)

Outlet Box Extender allows you to shim out electrical boxes flush with the new wall covering without having to remove or reposition the current electric box. It’s rather simple to put up.

Fits all outlet box types, PVC, Metal, and Fiberglass.

(Video) 5 Tools You Should Never Buy from Harbor Freight

It’s the only extension ring or extender that works with every type of box on the market. It’s the greatest electrical outlet box extender on the market.

The patented rear flange allows the ReceptXtenders electrical box extender to seal securely against each type of box, ensuring that no gaps exist between the existing box and your new extension.

What Makes it Different: Works with every type of box

3. Electrical Outlet Spacers for Tile

Best Outlet Extender for Tile (11 Thrilling Facts) (3)

Electrical Outlet Spacers for Tile works by snapping off as many of the segments as you think you’ll need, folding them back and forth into an interlocking stack, then reverse and re-fasten the screws. Slide the stack of spacers over the screw after backing the screws holding the outlet out until they are flush with the surface.

One customer shared that they specifically used this for tiles.

If necessary, you may simply add or delete individual ones to get them perfect. If you’re not sure, use an extra one since they’ll compress as you tighten them.

You’ll need longer screws if you have thick tile. If that’s the case, go to your local hardware store and get longer ones. This is at least a thousand times better than installing an outlet box “extension.”

What Makes it Different: Used for tiles

Bottom Line:

If you’d ask us who we would personally buy from, it would have to be Electrical Outlet Spacers for Tile (the 3rd option)

An outlet extender is a small tool that can be used to make tiling projects easier. It is inserted into the outlet box, and then the tile is placed over it. The outlet extender helps to level the tile and prevents it from sliding out of place. For more information on using an outlet extender, read our tutorial.

How do I extend my outlet box for tile?

It is not uncommon during a bathroom, or kitchen remodels to need to extend an electrical outlet box to accommodate new tile.

This is usually because the new tile is thicker than the old tile and the outlet box needs to be flush with the new tile. In most cases, this is a relatively easy task that can be completed in a few simple steps.

  • First, you will need to purchase an outlet box extension kit. These can be found at most hardware stores.
  • Be sure to get the correct size extension for your outlet box.
  • Next, you will need to turn off the power to the outlet at the circuit breaker. Once the power is off, remove the old outlet box from the wall.
  • Next, you will need to install the new outlet box extension. To do this, you will attach the extension to the old outlet box using the screws with the kit.
  • Once the extension is in place, you will need to attach the new outlet box to the wall using the provided screws. Be sure to tighten the screws securely so that the outlet box does not become loose

Finally, you will need to reconnect the wires to the new outlet box.

  • To do this, you will simply twist the wires together and then screw on the wire caps. Be sure to screw the wire caps on tightly so that they do not come loose.
  • Once the wires are connected, you can then turn on the power to the outlet at the circuit breaker and test it to make sure that it is working properly.

If you follow these simple steps, you should be able to extend an outlet box without any problems. However, if you are still having trouble, you may want to hire an electrician to do the job for you. Electricians are trained and experienced in this type of work and will be able to get the job done quickly and efficiently.

(Video) The BIGGEST Mistakes DIYers Don't Know They Are Making When Wiring Receptacles | How To

Do you have to extend outlets when installing a backsplash?

One of the most common questions we get asked here at [company name] is whether or not you need to extend your outlets when installing a backsplash. And the answer is: it depends.

If you’re installing a backsplash in a kitchen, you’ll need to be sure that all of your outlets are GFCI-protected.

However, if you’re installing a backsplash in a bathroom, you won’t need to extend your outlets unless they’re more than six feet from the edge of the sink.

Of course, every installation is different, so be sure to consult a licensed electrician before starting your project. With a bit of planning and the help of a professional, you can easily install a backsplash without extending your outlets.

How can I make my outlets stick out more?

In a world where anyone can start a blog or podcast, it can be hard to make your outlets stand out from the crowd. But if you want to be successful, it’s essential that you find ways to make your voice heard.

One way to make your outlets more visible is to guest post or speak on other people’s platforms. This will help you reach a new audience and get your name out there.

Whatever you do, don’t give up. It takes time and effort to build a following, but it’s worth it if you’re passionate about your message. With a little persistence, you can make outlets stick out more.

How far can you extend an outlet?

According to the National Electrical Code (NEC), you can extend an outlet up to 20 feet from the original outlet using a 14-gauge wire. If you’re extending an outlet further than 20 feet, you’ll need to use a heavier gauge wire.

Extending an outlet can be a great way to add power to a room that doesn’t have any outlets, but it’s important to follow the NEC guidelines to ensure that you do it safely.

How do you piggyback an outlet?

Piggybacking an outlet is a simple way to get power to a new location without having to run new wiring.

It involves connecting the new outlet to an existing outlet using a pigtail splice. Pigtail splices are made by splicing together the hot, neutral, and ground wires of the new outlet with the wires of the existing outlet.

Piggybacking an outlet is a relatively easy task that can be completed in a few steps.

First, turn off the power to the circuit breaker that supplies power to the outlet you’ll be working on. Next, remove the outlet cover and disconnect the wires from the outlet. Then, splice the wires together using a pigtail splice and connect the new outlet to the splice.

Finally, replace the outlet cover and turn the power back on.

(Video) ResMed AirSense 11 AutoSet and CPAP Machine || REVIEW

How do you install an outlet spacer?

An outlet spacer is a device that is used to widen the space between an electrical outlet and the wall. This is often necessary when an outlet is too close to the wall, making it difficult to plug in devices. Installing an outlet spacer is a relatively easy process that anyone can do.

  1. Start by turning off the power to the outlet at the breaker box.
  2. Remove the screws that hold the outlet in place and carefully remove the outlet from the wall.
  3. Take the outlet spacer and place it over the outlet. Make sure that the spacer is snug against the wall.
  4. Use the screws that came with the outlet spacer to secure the outlet to the wall.
  5. Turn the power back on at the breaker box and test the outlet to make sure it is working properly.

Do outlets go over tile?

If you’re planning on doing any sort of tiling in your home, you might be wondering if outlets need to go over tile.

The answer is yes, and there are a few different ways to do this.

The first option is to use an outlet box that is made specifically for tiling. This type of box is recessed into the wall so that the face of the outlet is level with the surface of the tile.

Another option is to use a standard outlet box and install it flush with the surface of the tile.

You can then use special outlet covers that are made to go over tile. Whichever method you choose, make sure to consult with a professional electrician to ensure that the outlets are installed correctly and are up to code.

How do you fix a sunken outlet?

If you have an outlet that are recessed too far into the wall, they can become sunken and no longer work properly. This can be due to a number of factors, such as paint buildup or incorrect installation. Thankfully, there are a few easy ways to fix a sunken outlet.

The first thing you’ll need to do is identify the problem.

  • If the outlet is sunken due to paint buildup, you’ll need to sand down the area around the outlet until it is level with the rest of the wall.
  • If the outlet is sunken due to an incorrect installation, you’ll need to remove the outlet and reset it at the correct height.

Once you’ve identified the problem, simply follow the appropriate solution, and your outlets should be good as new.

What is a floating outlet?

A floating outlet is a type of electrical outlet that is mounted on the wall without the need for screws or nails. These types of outlets are becoming increasingly popular, as they offer a clean and modern look. Additionally, floating outlets are much easier to install than traditional outlets, as no special tools or hardware are required.

If you’re looking to update the outlets in your home or office, consider floating outlets. These sleek and stylish outlets are sure to give your space a modern makeover.

If you have any questions about whether or not an outlet extender is right for your tile project, please feel free to contact us. We would be happy to help you make the best decision for your situation.

FAQs

How do I extend my outlets after a backsplash? ›

A stack of 3-4 spacers is usually sufficient to extend the outlet out far enough for most backsplash tiling, creating the appropriate amount of space between the outlet and wall to be flush with your tile. You need 2 stacks of spacers—1 to put underneath each screw that holds the outlet in place.

What can I use to extend my electrical outlet box? ›

Box extenders fit around the existing electrical box. They come in different sizes, so they can extend the box just enough that it's flush with the wall.

How do you make an outlet stick out farther? ›

Take the electrical box extender or shimming plate and slide it back behind the outlet plugs. Screw the outlet plug(s) to the extender/shimming plate and electrical box. Or, take your outlet spacers and fold them until they are thick enough to cover the recessed gap.

Do you need to leave an expansion gap for tile? ›

"One of the most basic and important facts an installer should know when working with ceramic (including porcelain, glass, and natural stone) tile is to always have expansion joints in place. If expansion joints are not part of the installation, failure is lurking in the shadows waiting to strike.

Should outlet boxes be flush with tile? ›

The simple answer is that, if the box is flush with your mounting surface, it might be compliant as-is after tiling. If not (i.e. your tile is over 1/4"), you can make it compliant with an extension ring that does indeed use long mounting screws. Save this answer.

Are electrical outlet extenders safe? ›

Don't let your extension cords become potential fire hazards. Extension cords are a common and convenient way to bring power to electrical devices. But used without proper caution, they can become fire hazards and pose risks to your personal safety.

What is an outlet extender called? ›

An extension cord (US), power extender, drop cord, or extension lead (UK) is a length of flexible electrical power cable (flex) with a plug on one end and one or more sockets on the other end (usually of the same type as the plug).

How much does it cost to extend an outlet? ›

The national average can run anywhere from $100 to $500 per outlet depending on the complexity of the job.
...
How Much Does A New Outlet Installation Cost?
Average Outlet Installation Price
Average Cost$175 per outlet
Highest Cost$500 per outlet
Lowest Cost$100 per outlet
Jul 25, 2022

What are outlet spacers? ›

Outlet spacers are a great solution if you're installing an accent wall with panels or adding tile around an outlet in a bathroom or kitchen. Outlet spacers allow you set the outlet out further so it's flush with the new surface of the wall.

How do you get a plug to stop falling out of an outlet? ›

If the outlet tightly holds other devices and you have one loose plug, you can try to straighten out bent prongs and then try again. If it's a lamp, you can get a cheap rewiring kit at the hardware store or ask an electrician to rewire it. Small items like a phone charger should probably just be replaced.

How many times can you extend an outlet? ›

Electrical codes restrict the number of lights or electrical outlets that can be connected to one circuit. Typically, you can have no more than eight lights or electrical outlets on a 15-amp circuit. To determine the amp rating of a circuit, just look at the number on its breaker or fuse in your main electrical panel.

Can you use washers to extend outlet? ›

Washers: The simplest solution, you can just put washers under the screws to add depth. You'll need to switch out the screws for a longer version of the same diameter as what you have. This is a fine option if your socket is barely loose and you just need a few spacers.

How far apart should expansion joints be for tiles? ›

TCNA states movement joints for interior applications should be placed at least every 6.1 to 7.6 m (20 to 25 ft) in each direction unless the tilework is exposed to direct sunlight or moisture, which would then require the movement joints placed at least every 2.4 to 3.7 m (8 to 12 ft) in each direction.

How far apart should expansion joints be in tiles? ›

Joints must also be formed within the tile field, every 12 to 16 feet in each direction for exterior floors and for interior floors exposed to sunlight. These are to be kept clean of mortar and grout when the tiles are set, and not created by saw-cutting after the floor is in place.

How wide should a tile expansion joint be? ›

Movement joints must go right through the tile and adhesive bed to the substrate background and be kept free from dirt and adhesive droppings. Joints shall not be less than 4mm and not greater than 10mm wide. Seal all movement joints with a suitable, expandable coloured silicone sealant to match your grout.

Does tile have to go under toilet? ›

The short answer to the question 'should toilet sit on top of tile?' is simple — if you've opted for ceramic tiles, then you should tile them under the toilet, if you've opted for vinyl tiles on the other hand, then you should go with tiling them around the toilet.

Does tile go down before vanity? ›

If you're planning to tile around the entire room, it makes sense to tile before installing the vanity unit. That way, the room and walls are set for any changes you might want to make in the future, whether that's with the vanity unit or any other component within the bathroom.

Does outlet extender reduce power? ›

No, devices don't get less power when using a splitter, each device plugged into the splitter will get its required power. The only time this won't happen is if you overload a circuit. A common misconception is that one outlet gives a set amount of power.

Why should you avoid plugging a bunch of socket extenders into each other? ›

DON'T plug extensions cords together.

Get one that is the correct length you need. It may be tempting to just string them together, but resist the temptation. Extending the length of an extension cord by “daisy-chaining” can lead to overheating the cord by overloading it, creating a serious fire hazard.

Is it safe to plug a surge protector into an outlet extender? ›

Plug surge protectors directly into wall outlets. Do not “daisy chain,” that is, plug surge protectors into extension cords or other surge protectors.

Do outlet extenders use more electricity? ›

Will plugging an appliance into an extension cord waste power? The short answer is yes. Plugging an appliance into an extension cord will use more power than if the appliance was plugged directly into the wall.

Are power strips better than extension cords? ›

An extension cord is great for devices placed far from outlets. Meanwhile, power strips are a good option if you want to multiply electrical outlets from a single source. If you're unsure which is the best fit for your needs, you can always consult licensed residential electricians.

Are surge protectors better than extension cords? ›

Extension cords are crucial when you need to stretch an appliance from one location to a distant electrical outlet, while surge protectors help keep your equipment safe.

Does upgrading outlets increase home value? ›

Adding outlets will improve your home's value:

If you have enough space in your breaker panel, adding outlets can help improve the worth of your home. Prospective buyers love to see easy-accessed outlets. It will also help keep you from overloading any circuits.

How much does it cost to rewire a 1500 sq ft house? ›

Cost to Rewire a House Per Square Foot
Square FeetAverage Cost
1,000$4,700
1,200$5,900
1,500$7,400
2,000$9,800
2 more rows
Mar 1, 2023

How do outlet extensions work? ›

How Do Extension Boards Work? A power strip or an extension board is comprised of multiple sockets connected independently to a flexible power cable and encased in a shockproof plastic shell. It draws power from the wall sockets and distributes it amongst devices connected to these multiple sockets.

What causes a plug to fall out of an outlet? ›

There are generally two reasons why a plug won't stay in an outlet. Either the contact points in the receptacle are worn out, or the outlet face is too loose. No matter the scenario, you'll want to fix your outlets sooner rather than later, as both issues can be fire hazards. They can also expose you to direct voltage.

What causes an outlet to keep tripping? ›

The usual suspects for ground-faults include worn insulation, conductive dusts, water, or other "soft grounds." Ground faults account for more than 80% of equipment short circuits and in 90% of those cases it is caused by insulation deterioration on wires and cables.

Why do my outlets keep going out? ›

You might be overloading that particular circuit with too many appliances or devices working at the same time. Or, there could be a problem with your wiring or circuit breaker itself. If your outlet is not working, but the breaker is not tripped either, there might be an issue with your circuit breaker.

What is an outlet shim? ›

Plastic shims are a fast, easy solution for backsplash electrical outlets in which the wall box is recessed below tiling, quartz, granite, paneling, etc. Also provides clearance needed for screws when installing decorator devices sitting directly on a hard surface. Features.

Should electrical box be flush with drywall? ›

When you install an electrical box, make sure it is flush with the surface of this drywall strip; this will ensure the boxes are at the proper depth when the walls are finished.

What is a flush mount outlet? ›

Flush-mount power outlets (including switches, data jacks, and keypads) are installed directly into walls so that the outlet surface is flush, eliminating the need for cover plates. Flush-mount outlets integrate seamlessly with their surroundings: No more wall clutter.

How do you add more tiles? ›

Add a Tile
  1. Check the following on your mobile device: ...
  2. In the Tile app, tap the + sign at the top left corner of the screen.
  3. Tap Activate a Tile. ...
  4. Press the button on the Tile once to make sure it rings. ...
  5. Tap Next. ...
  6. The app displays the message "Activating Tile" and rings the Tile.

Videos

1. 20 Oscillating Multi-Tool Tips for Beginners
(Specific Love Creations)
2. How To Add An Outlet To A Finished Wall
(Everyday Home Repairs)
3. Family Box Fort Prison Escape!!! 1 Hour Compilation
(Trinity and Beyond)
4. INSTALLING MY KITCHEN BACKSPLASH! || DIY SMALL KITCHEN MAKEOVER
(DIY Huntress)
5. HSN | Gifts Under $50 11.08.2021 - 03 PM
(HSNtv)
6. HSN | Gifts For The Guy with Guy Finale 12.18.2021 - 08 AM
(HSNtv)
Top Articles
Latest Posts
Article information

Author: Gov. Deandrea McKenzie

Last Updated: 01/22/2023

Views: 6212

Rating: 4.6 / 5 (66 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Gov. Deandrea McKenzie

Birthday: 2001-01-17

Address: Suite 769 2454 Marsha Coves, Debbieton, MS 95002

Phone: +813077629322

Job: Real-Estate Executive

Hobby: Archery, Metal detecting, Kitesurfing, Genealogy, Kitesurfing, Calligraphy, Roller skating

Introduction: My name is Gov. Deandrea McKenzie, I am a spotless, clean, glamorous, sparkling, adventurous, nice, brainy person who loves writing and wants to share my knowledge and understanding with you.